Shake For Gas Patch

$4.00

SKU: 500-523 Categories: , , Tags: , , , , , , , ,

Description

Kellie's Designs

500-523 Shake For Gas Patch (2 versions included)
4×4 Friendly

500-523-A Freestanding Shake For Gas Patch
Design Size: 2.69 x 2.69 inches
Stitch Count:  14,166
*No fabric needed!  Stitch directly on water soluble stabilizer!

Basic Project Instructions:
1. Hoop TWO pieces of water soluble stabilizer (the mesh kind)
2. Stitch design
3. Unhood and cut patch out, rinse out the stabilizer and let patch dry.

500-523-B Applique Will Shake For Gas Patch
Design Size: 2.69 x 2.69 inches
Stitch Count:  7652

Basic Project Instructions:
1. Hoop TWO pieces of water soluble stabilizer (the mesh kind)
2. 1st color change is your fabric placement stitch – stitch directly on stabilizer
3.  Float fabric on stabilizer, making sure all placement lines are covered.  2nd
color change will tack your fabric to the stabilizer.
4.  DO NOT UNHOOP – carefully trim fabric to stitch line
5.  Run the design.
6. Unhood and cut patch out, rinse out the stabilizer and let patch dry.

You are purchasing a MACHINE EMBROIDERY DESIGN PATTERN. You will need an embroidery machine to stitch this design out. Please be sure to review the design size BEFORE purchasing.

Your downloadable .zip file will contain the following design formats:  PES, HUS, JEF, DST, PCS, VIP, SHV, EXP and XXX.

If you need to convert the file to another format, please convert the PES file as that is the native digitized format.

No return or refund is offered on electronic media.

Copyright 2022 – Kellie’s Designs, All Rights Reserved.
https://kelliesdesigns.net

You may also like…